Complete Electrical Bootcamp
Burraq Engineering Solutions is a company that provides electrical design services for various types of projects, including “Complete electrical bootcamp design”. This may refer to the design and implementation of electrical systems for facilities used for training or educational purposes, such as military or vocational training centers. The specific range of services offered by a company may vary, but they may include things like power distribution, lighting, communication systems, and other electrical infrastructure.
Designing Purpose of Complete Electrical bootcamp
It is a training program that focuses on teaching individual skills and the knowledge needed to design and implement electrical systems for facilities used for training or educational purposes. This can include things like power distribution, lighting, Communication systems, and other electrical infrastructure. This type of training may be for electrical engineering professionals or individuals who wish to enter the field. It may be offered by a variety of organizations, including engineering consulting firms, commercial schools, or vocational training centers. Training may be delivered in a variety of formats, such as classroom instruction, online courses, or hands-on training
Complete Electrical Boot camp Design Training course Details
- COMPLETE ELECTRICAL DESIGN TRAINING COURSE
- AutoCAD Electrical basics and the professional commands.
- NO contact, NC contact CT, Relay Coil, Timer coil, NO push button, NC push button, SP MCB:
- Copy and paste attribute symbols into palate and design center
- Discus types of electrical diagram
- How to make lighting distribution board (LDB) for story building
- Draw DB diagram with respect to different types of load. (SLD and power circuit & calculation)
- Load Balancing
- SLD of DB checking/finishing and discussion
- Draw SLD of motor control center (MCC), motor calculation & selection method of motor components
- SLB MCC diagram checking/finishing and discussion
- Study and understand DOL circuit and operation
- DOL starter diagram (used attribute & Dynamic blocks for control circuit)
- Study and understand ASD circuit and operation
- ASD starter diagram (used attribute & Dynamic blocks for control circuit)
- Study and understand REV/FOR circuit and operation
- REV/FOR starter diagram (used attribute & Dynamic blocks for control circuit)
- Checking schematic diagram of DOL, ASD & REV/FOR starters / fishing and discussion
- Overview about all international standard relevant to electrical switchgear field
- Types of switchgear panels (slides), Types of diagram (slides)
- ANSI protection relay codes
- Switchgear device/components codes
- Draw the SLD & Schematic diagram of interlocking between 3 –motors with operating water level switch23. Checked schematic & control circuit of motor interlocking/fishing and discussion
- Draw SLD, Schematic & diagram and interlocking of WAPDA & Generator source with using TP ACBs (25. Draw PFI diagram (SLD and power circuit)
- PFI diagram discussion and Calculation for Power factor bank.
- Wiring diagram of LT Switchboard
- Copper bus bar calculations
- ATS (Automatic Transfer Supply) Control Power diagram and Selection criteria.
- Transformer and Generator size calculation and Proposal
- Motor Control Center sizing i.e. Breaker sizing according to NEC, Contactor sizing, overload relay sizing
- DOL, DOL 2 location, DOL long distance
- DOL Reverse Forward
- Star Delta
- Reverse Forward star delta
- Series Resistance Method
- Series Inductance Method
- Autotransformer Method
- Buzzer and Light indication for faults
- CT and PT calculation
- Cable sizing and BS/NEC standard for voltage drop of cable selection.
- Short circuit current calculation for breaker and cable selection
- Introduction to industrial panels
- Panel components
- Transformers
- Power Supply
- Circuit Breakers
- Disconnect Switch
- Terminal Blocks
- Relays
- Contactors
- Overload Relay
- Fuses
- Panel layout and design
- Enclosure type and sizing
- Power and circuit protection
- Control components
- Operator interface
- Motor Drives
- VFD
- Motor Forward reverse run
- Motor Starters
- Star delta
- DOL
- Cable selection and size calculation
- Panel wiring
- Programmable Logic Controller (PLC)
- Safety and regulations
- Panel maintenance
- LV Panels
- LV Metering Panel
- Synchronization
- ATS with Auto Generator Sulf
- Main Panel and Sub Main Panel
- Generator Panel
- Relay Panel
- Power Factor Improvement Panel
- LT Switchboard with different incomings
- ACB
- HV Panels
- 11KV Protection Panel
- 11KV Switchboard Incomings and Outgoing Panels.
- Breaker Sizing for 11KV Line (Transformer Primary)
- VCB
- Butchers Relay
- Distance Relay
- CDG 112 Relay
- Relays Panel and Relays connections
- Different types of switching relays
- Home Wiring/Building Wiring
- Test for Building Wiring
- Continuity test
- Short circuit test
- Open circuit test
- Earth Leakage Test
- Polarity test
- Home wiring Principles and rules according to IEE Rules and Regulation
- Test with Must meter, Series test lamp, and Mugger for Home or Building
- Home wiring circuits and their applications
- One Lamp control
- Two Lamps in Parallel
- Two Lamps in series
- Staircase circuit
- Tunnel circuit
- Tube lights circuits
- Series test Lamp
- Panel testing using series test lamp or two lamp in series
- Testing of all circuits and practical’s of all circuits
- DB Design/Power DB Design SLD for multi storage building
- Single Line Diagram of Sub Main Panel /Main Panel
- ATS Panel
- Lighting Calculation, Lighting design and lighting plan with DIALUX
- Earthling and Grounding according to NEC Article 250
- Tower Calculation for Lighting Arrestor
- Cable Selection and format of reading a cable according to BS/NEC/IEC
- Load scheduling Transformer selection and Generator selection and Main bus bar selection
- Building/Home/Room Layout for lighting, fans or other equipment’s on design.
- LAYOUT Plan Drawings reading and working and conduit LAYOUT
- BOQ and SOP
- Cables and glands types
- SPDs and Lighting arrestors
- Cable Trays
- CCTV System
- Fire Alarm System
- Important Documents
- Cable schedule
- Material take off list
- ETAP Software Installation
- Introduction to ETAP Software
- How to Create a New Project in ETAP
- How to Load the existing Project
- ETAP toolbar introduction
- One Line Diagram in ETAP
- Create your first one line diagram
- Composite Network in ETAP
- Creating a template and importing it to one line diagram
- Load Flow Analysis
- Run Load Analysis on Single Line Diagram
- Voltage Drop Calculations
- Bus Voltages, Cable voltage Drops
- Bus Under voltage
- Cable overload
- Transformer Overload
- Alert View in ETAP
- Critical and Marginal Conditions in ETAP
- Arc Flash and Short Circuit Analysis
- Run Short circuit and Arc Flash Analysis
- Short Circuit Current Evaluation
- How to Fault a bus
- Edit Study Case
- Motor Start Analysis
- Setting up the Motor Rating
- Motor Start static
- Setting up the Motor Events in Edit Study Case
- Starting Current and its Plot in ETAP
- Motor Start Dynamic
- Setting up the Motor Parameters
- Setting up the Motor Inertia, Load
- Motor Start Dynamic using VFD
- Protective Device Coordination Study
- Breaker Settings
- CT settings
- Over current Relay Settings
- Sequence of Operation
- How to generate report on ETAP
- Introduction to ETAP Level 2 Training
- 167. Introduction to course
- Introduction to ETAP Toolbar
- Rating Components
- Presentation Toolbars
- Harmonic and Transient stability analysis
- Ground Grid System
- Cable Pulling System
- Underground raceway system
- Cable ampacity
- Protective Device co ordination
- Protection Schemes
- Bus bar Differential Protection
- Transformer differential Protection
- Motor Protection
- Directional Overcurrent Protection
- Over and under voltage Protection
- Over and under frequency protection
- Reverse Power Protection
- Revision and wizard toolbar
- DC Load Flow
- Battery sizing calculation
- Solar Power System
- Wind Power System
- Advance Power system study
- Optimal Power flow and Unbalanced load flow
- Optimal capacitor placement
- Switching sequence management
- Final Project
- Industrial Electrical Controls-Design and Installation
- Basics of Relays, Contactor, MCB, MCCB, ELCB, ACB, VCB etc.
- Working Details of Different Types of Electric Motors
- Designing of Control Circuits Using Contactors, Relays, and Timers etc.
- Star Delta Starter Designing for 3 Phase Motors with Specification
- Practical Wiring Session on Different Controls
- Motor Drives – AC Drives VFD à Parametering , Motor Operations
- Safety and Management Concepts of Designing a Project
- MCC DESIGN
- Breaker sizing , Overload Relay Setting and Sizing, Contactor sizing, Busbar Sizing,
- SUBSTATION DRAWINGS SLD
- AUTOCAD for drawings Preparation
- Power and Control Drawings
- Protection Relays
- Breaker and Relay Testing
- Panel Layout Design
- Control Panel Designing
- Different Types of Panels
- Basic Components to be Installed in a Panel
- Wiring Details of Panel
- Specification and Physical Dimension of Components
- Earthing and Cabling of Panels – Standard Procedures
- Types of drawings and its implementation
- In this course we will provide all materials and equipment.
- Overview of different VFD’s Fuji, INVT, and Danfoss and Schneider
- Selection of VFD for Motor
- Source of Freq.in VFD
- Source of Operation in VFD
- Jog Mode of Operation in VFD
- Multiple Sources of Frequency in VFD
- Disable the Reverse Operation of Motor?
- How to Secure/Lock your Parameter?
- Multi-step Speed Commands in VFD
- Acceleration & Deceleration Time & Speed Inhibit
- How to Bound the Frequency of Drive (Upper Bound & Lower Bound Function)
- How to Reset the External Fault in Drive
- How to change External Control of VFD
- VFD Operational Feedback (ON/OFF)
- Reading feedback of getting Desired Frequency in VFD
- VFD Biasing
- Biasing the Frequency
- Biasing the Frequency with Pot. Freq. Gain
- Biasing the Voltage
- Acc./Dec. Time 1 (Default)
- Acc./Dec. Time 2 (Conditional)
- Introduction to Scaling
- Wiring and Installation of VFD
- Motor Speed Control using Built-in Potential.
- Motor Speed control using Keypad of VFD
- Motor Speed control using 0-10V (Analog Values)
- Motor Speed control using 0-20mA (Analog Values)
- Motor Max and Min Frequency set/reset
- VFD Overload activation for Motor Protection
- Motor Reverse Forward using functions.
- Advance Functions
- Two Motors On/off using One VFD
- Motor Speed Control through Thermocouple (Analog Sensor)
- Motor Reverse Forward using external signals.
- Synchronization of two VFD’s (TEXTILE MILL Examples)
- Complete wiring of VFD
- Wiring of Analog sensors with VFD
- Introduction to solar system and Solar System Installation
- PV Array and its types
- Mono Crystalline vs poly Crystalline
- Intro to PVSYST software
- PV system major parts
- PV modules (groups of PV cells), which are commonly called PV panels
- Batteries
- Charge regulator or controller for a stand-alone system
- Inverter
- Wiring
- Mounting hardware or a framework.
- Panel mountings and their types
- Rail-based mounting system.
- Ballasted mounting system.
- Anchored mounting system.
- Residential roof.
- Standing-seam mounting system:
- Corrugated roof mounting system.
- Fully-railed system or Shared-rail system.
- Rail-less mounting system.
- Pv system types
- Grid-tied system
- Grid-tied system with battery back-up
- Off-grid system
- Solar system installation considerations
- Load calculations
- Panel size calculations
- Battery types and size calculations
- Charge controller types and selection
- PWM vs MPPT controllers
- Inverter types and selection calculation
- Battery-based Inverter/Charger
- Introduction to DIALUX Software
- How to Create Project in DIALUX and Project Settings
- Interface of DIALUX (like bars, buttons, objects, Lighting catalog, room editor, the guide etc.)
- Rectangular Room Lighting Design
- How to install Plugin and IES File
- Lighting Design in L-Shape Room
- How to Import CAD file in DIALUX
- Lighting Design of Rectangular Room using CAD File
- Lighting Design of Polygonal Room using CAD File
- Corridor Lighting Design using CAD File
- Emergency Lighting Design
- Wall Mounted Lighting Design
- Street Lighting Design
- Stadium Lighting Design
- Lighting Design using Blue Icon
- False Color Display and Objects in Room
- Perform all lighting calculations using DIALUX software
- Studying all types of lighting and choice of these types
- Studying all types of interior lighting
- Studying all types of exterior lighting
- Studying all lighting drawings and the quality, intensity and viewing
- Performing lighting analysis reports
- Full project exercise
- SOFTWARES INCLUDED
- ETAP—AUTOCAD—PVSYS—REVIT—DIALUX EVO
- BENEFITS: WORK ON A TENDER PROJECT
Complete Electrical Boot camp
- Rs 50,000/-
- Course Duration 3 Months
- Online Session
- On Campus Lecture + Practical
- Video Lecture Available
- Urdu & English
- Fee: 50,000
- Duration: 3 Months
- Timing: 9AM-11AM, 11AM-1PM, 1PM-3PM, 3PM-5PM, 5PM-7PM, 7PM-9PM